HE351 discount battery 2900mAh/11.16WH for Nokia cellphone

Cheap Xiaomi battery recharge 3070mAh/11.8WH BM3C battery for Xiaomi 7 Mi7

Tablet password forgot how to crack?

Apple IPAD

1. First of all, you have to put your computer in the boot state, but also open iTunes on the computer, connect the iPad to the computer through the data cable.

2. When you connect your tablet and computer, press your home button and power on the keyboard until the ipad screen appears:

3. You will find that a box will pop up on your computer: click the “OK” button

4. If you find that your tablet is not the latest version of the system, iTunes on your computer will remind you if you want to install iso’s latest system: Click “Restore and Update”.

5. Next, on the page you installed, a box will pop up and click “Next” – “Agree”.

6. And you will see that on the screen of your computer, you will see the latest program download waiting for iso, which takes about 1 hour. The screen saver or black screen cannot appear during the computer screen.

7. Finally, after the version on your tablet is updated to the new version, clicking on the recovery ipad system will automatically install it into your ipad.

8. The final step, after waiting for the new version to be downloaded, will display the screen you need to use when you buy it back. Step by step, finally enter the previous Apple ID and Apple password to complete the recovery, and you can re-use our iPad!

Android tablet

1. Different from Apple’s tablet, it should be shut down on the basis of the power not less than 20%. In the off state, press and hold the volume up + down button + power button, the volume up and down button keeps pressing for 10 seconds. Above, this time will enter the recovery mode, as shown in the figure:

2, find the settings on the flat panel, find “restore factory settings” in the settings, and then use the power button to determine, it will automatically double-clear and restore the factory. Figure:

3, after everything is done, reopen your tablet is the time to buy it back, you can enter the tablet.

iPhone battery disassembly process (iPhone6s Plus as an example)

To avoid damage to your phone, please be aware of the following.

1. Please use the screwdriver correctly, otherwise it will cause the screw to slip. Or damage the phone.

2. Be sure to use a magnetic screw that helps you remember where each screw is located. Improper installation of the screw may damage your phone.

3. In the process of replacing the accessories, the mobile phone cable is relatively fragile, please be careful to disassemble.

4. During the disassembly process, remember to put the removed screws in a safe position to avoid the lack of screws during installation.

Disassemble steps:

1. Remove the teardown tool and phone battery.

2. Turn off your phone.

3. Use a pentagonal screwdriver to remove the two pentagonal screws under the phone (located on both sides of the phone’s charging port).

4. After removing the screws, do not rush to open the back cover of the phone. First use the hair dryer to heat the edge of the phone for 1-2 minutes (so that the waterproof glue softens, easy to open the back cover).

5. Remove the suction cup from the tool and place the suction cup above the “back button”.

6. Gently pull a slit and insert the triangle into the gap.

7. Use a triangular piece to gently open the display. Do not use too much force too fast, otherwise the body may be damaged.

Note: If you are concerned about poor control, you can insert several triangles into the gap to fix it while you are opening the display.

8. After you have opened the display, you can open the display and pull the display off, paying attention to the glue.

9. Use the Phillips screwdriver to remove the set screw on the battery clip iron.

10. Then remove the battery clips with tweezers.

11. Use the disassemble crowbar to remove the battery cable opening. The intensity is not too strong and it is easy to remove.

12. Using a Phillips screwdriver, remove the captive screws on the LCD assembly connector cover. At the same time, the other hand must hold the phone cover.

Note: Due to the different screw sizes, in order to prevent the position of the screws from being installed when the screws are installed, the components of the mobile phone are damaged. A screw “magnetic memory mat” is recommended to help you remember the position of the screw.

13. Use the tweezers to remove the assembly interface cover, and then use the disassemble crowbar to remove the LCD assembly cable ties. (Remember the strength is not strong)

14. Remove the back cover of the phone. Use a disassemble crowbar to shovel a piece of battery tape attached to the battery.

15. Then pull the battery tape that was shoveled down and pull the battery tape out of the bottom of the battery.

The battery tape can be easily pulled off with proper force.

 

To avoid damage to your phone, please be aware of the following.

1. Please use the screwdriver correctly, otherwise it will cause the screw to slip. Or damage the phone.

2. Be sure to use a magnetic screw that helps you remember where each screw is located. Improper installation of the screw may damage your phone.

3. In the process of replacing the accessories, the mobile phone cable is relatively fragile, please be careful to disassemble.

4. During the disassembly process, remember to put the removed screws in a safe position to avoid the lack of screws during installation.

Disassemble steps:

1. Remove the teardown tool and phone battery.

2. Turn off your phone.

3. Use a pentagonal screwdriver to remove the two pentagonal screws under the phone (located on both sides of the phone’s charging port).

4. After removing the screws, do not rush to open the back cover of the phone. First use the hair dryer to heat the edge of the phone for 1-2 minutes (so that the waterproof glue softens, easy to open the back cover).

5. Remove the suction cup from the tool and place the suction cup above the “back button”.

6. Gently pull a slit and insert the triangle into the gap.

7. Use a triangular piece to gently open the display. Do not use too much force too fast, otherwise the body may be damaged.

Note: If you are concerned about poor control, you can insert several triangles into the gap to fix it while you are opening the display.

8. After you have opened the display, you can open the display and pull the display off, paying attention to the glue.

9. Use the Phillips screwdriver to remove the set screw on the battery clip iron.

10. Then remove the battery clips with tweezers.

11. Use the disassemble crowbar to remove the battery cable tie. The intensity is not too strong and it is easy to remove.

12. Using a Phillips screwdriver, remove the captive screws on the LCD assembly connector cover. At the same time, the other hand must hold the phone cover.

Note: Due to the different screw sizes, in order to prevent the position of the screws from being installed when the screws are installed, the components of the mobile phone are damaged. A screw “magnetic memory mat” is recommended to help you remember the position of the screw.

13. Use the tweezers to remove the assembly interface cover, and then use the disassemble crowbar to remove the LCD assembly cable opening. (Remember the strength is not strong)

14. Remove the back cover of the phone. Use a disassemble crowbar to shovel a piece of battery tape attached to the battery.

15. Then pull the battery tape that was shoveled down and pull the battery tape out of the bottom of the battery.

The battery tape can be easily pulled off with proper force.

16. Using a hair dryer, properly heat the back cover of the phone for 1-2 minutes, making the battery tape of the attached battery softer and easier to remove.

17. After proper heating, use the disassemble tamper to remove the battery.

 

Remove the battery tape.

Steps to install the battery

1. Remove a piece of protective film from the battery tape.

2. Attach the battery tape to the battery and remove another piece of protective film.

3. Install the battery

4. Then attach the exposed battery tape to the battery.

5. Remove the old waterproof glue. Then gently peel off it.

6. Remove a piece of protective film from the waterproof adhesive.

7. Attach the waterproof glue to the edge of the back cover and align the tape with the edges. Smooth the waterproof glue.

8. Remove another protective film.

9. Install the display and fasten the LCD assembly cable ties.

10. Fasten the battery cable tie.

11. Close the phone cover, do not put the screws first.

12. Then turn on the phone and check the battery.

13. When the test is complete, turn off the screen display.

14. Install the LCD assembly connector cover.

15. Use a Phillips screwdriver to install the fixing screws on the LCD assembly cable cover.

16. Install the battery clip and screw on it.

17. Close the display. If the display does not fit, it may be that the accessory is not properly installed or something is stuck.

18. Using a pentagonal screwdriver, install the pentagonal screws under the phone.

19. Replacement is complete.

2 Wheels Hover Scooter Banlance Battery 10S2P18650 VICTPOWER

 

Cheap Video Game for sale, VICTPOWER 2 Wheels Hover Scooter Banlance battery 10S2P18650.

 

If you’re an avid gamer, you’ll find a thrilling selection of games, consoles and accessories. Our products include controllers, video rockers, cables, accessories for Nintendo Wii / Sony PS3 / Xbox 360 / Wii / Sony PSP.

VICTPOWER

Product Details
Brand: VICTPOWER
SKU: EVIC2738_Oth

Features

Pcode:VIC2738_Oth

 

The same type:

VICTa10S2PNB2200CC01 10S2P/22P-ST001 10S2P18650 HY18650-22P10S2P

 

Compatible models:

Voltage : peak – 42V, working – 36V
Capacity: 4.4Ah
Power: 158W
Cut-off voltage: 26V
Max. discharging current: 30amp
Max Continuous Discharging Amperage: 20 Amps
Rated Discharging Amperage: 15 Amps
Charging Current: <5 Amps
Charging Voltage: 43.2 Volts
Dimension: 135*85*57mm
Net Weight: 970g

Smart Balance Wheel
2 Wheels Hover Scooter Banlance

3.7V Symbol P360 battery for Motorola/Symbol P360, P370, P460 & P470 Scanners 5pcs

5140mAh/18.76Wh SMP SQU-1401 laptop batteries for sale

Cheap VARTA CP1654_A3 Battery 3.7V Replacement for VARTA Bluetoot Headset Battery Wearable Battery

simplo battery 7.4V pack for simplo wireless network LTE battery 4G equipment WIFI

best ULefone 2200mAh/8.36WH battery for ULefone U007 telephone battery

  • ULefone U007 2200mAh/8.36WH 3.8V, suitable for Ulefone U007. 100%compatible, fast shipping. 1 year warranty, 30 day money back guarantee.

    Best ULefone U007 2200mAh/8.36WH 3.8V BATTERY

    ULefone U007 battery
    Product details:

    Brand: ULefone smart phone

    Type: Li-ion-battery

    Voltage: 2200mAh/8.36WH

    Capacity: 3.8V

    Replacement Battery>> ULefone U007 2200mAh/8.36WH 3.8V

    Replace the following part numbers:

  • ULefone U007
  • Fits the Following Models:
    For Ulefone U007
    Charge limit voltage: 4.35V

    https://www.uk-online.co.uk/battery-ulefone-u007-for-sale-180586.html
    JP: ULefone U007 スマホのバッテリー

    IT: ULefone U007 Batteria

    ES: ULefone U007 Batería

    ULefone U007 maintenance tips

    Don’t use your phone’s power and then recharge it. Nowadays, smart phones use lithium-ion polymer batteries, which have no so-called “memory effect” in nickel-cadmium batteries, so there is no need to run out of batteries and recharge them. If the lithium battery is in a low voltage state for a long time, it may cause charging failure. So when the phone’s power drops to less than 20%, it should be charged. If it is a mobile phone that is not used for a long time, try to keep it in a full state and charge it for a while.

    Do not continue charging for a long time after the phone is fully charged Many small partners like to charge while sleeping, and then unplug the charger the next day. In this way, the phone will automatically stop charging after the battery is fully charged. However, during the charging process, the battery is overheated, and even the burning takes place during charging. We should try to avoid charging the phone for a long time without being guarded.

    Don’t play mobile while charging Nowadays, the computing power of smart phones is very powerful. Nowadays, the power to play games with mobile phones is even greater. However, due to the limitation of the internal space of mobile phones, it is impossible to install cooling devices such as fans. Even if the copper pipes are cooled, they may not be as thorough as PCs. Therefore, we should try to avoid overheating in the process of using the smartphone. If you play mobile games at this time, the heat generated by the battery and the processor will be superimposed.

    Do not charge your phone on the sofa/bed Fever is the culprit that shortens the battery life of mobile phones, and the phone can only self-heat. If you charge on the sofa or bed, it will cause the heat of the fuselage to accumulate, causing local overheating. In addition, the sofa, bed sheets and cotton wool are all flammable. If there is an accident at this time, the possibility of fire will be very high.

    Do not use a non-original charger or charging cable Whether it’s an Apple phone or an Android phone, the original chargers are standard USB ports and have built-in protection chips. If a third-party nameless charger is used, in order to save costs and produce some chargers without a protection chip, some small accessory manufacturers may have the risk of power instability or excessive current, which may cause damage to the smartphone .

    Do not use the computer USB interface to charge your phone Some people like me for the convenience of the picture, use the computer’s USB interface to charge the phone. However, the USB interface current of many computers is less than 500mA, and the process of charging the mobile phone will be very long. What’s more, the power supply mechanism of some computer motherboards is not perfect. If a variety of USB devices are connected or plugged in at the same time, the output current of the USB interface will be unstable, which is not conducive to the long-term use of the smart phone battery.

    Don’t use the charging treasure to charge your phone for a long time. Although many charging treasures can provide high current charging of more than 1A or even 2.1A, charging treasure is not a power supply after all, and cannot guarantee continuous output of voltage/current. In addition, the charging treasure itself will generate a certain amount of heat when charging the mobile phone, so it is not recommended to use the charging treasure for charging the mobile phone for a long time, and it can only be used as an emergency.

    Don’t use your phone for a long time if it is too cold Lithium batteries are not only afraid of heat, but also cold. In a cold environment, the activity of lithium battery and the lithium intercalation activity of the negative active material will be affected, and the battery capacity will decrease and the rate performance will decrease. When used at lower temperature conditions, lithium dendrites are formed on the surface of the negative electrode in severe cases, piercing the diaphragm and causing a safety accident.

    Why are you buying batteries at uk-online.co.uk?

    1. Our products are CE certified products, ensuring safe and reliable quality.

    2. All products are tested and used repeatedly before leaving the factory to ensure that the products you purchase are fully compatible with your equipment.

    3. All products are guaranteed to be new and the price is satisfactory to you.

    4. We will update the product regularly. If you have a battery model that you can’t find, please feel free to contact us.

    5. All products are backed by a 1-year warranty and a 30-day money-back.

    6. Our products are focused on the experience of UK users, please rest assured to buy.

    Other Hot Sales:

    Asus C11P1502 tablet battery 4750mAh – 3.8V
    Lenovo L13D1P32 tablet battery 4290MAH/16.3WH – 3.8V
    Asus C12N1320 tablet battery 7900mAh/31Wh – 3.8V
    Lenovo L12T1P3 tablet battery 3700mAh/3.7wh – 3.7V
    Lenovo L14D2P31 tablet battery 7000mAh/26.60wh – 3.8V
    Apple A1484 tablet battery 8827mAh – 3.73V
    Bose 404600 replacement battery 2300mah – 11.1V/12.4v
    Bose 063404 replacement battery 2230mAH/17Wh – 7.4V
    HP OL02XL tablet battery 4450 mAh – 7.4 V
    Bose 061384 replacement battery 2230mAH/17Wh – 7.4V
    ASUS C11P1517 tablet battery 4545mAh/18Wh – 3.85V
    Asus C11P1505 tablet battery 3948mAh – 3.8V
    Huawei HB436486ECW replacement battery 3900mAh/14.9wh – 3.82V
    Medion A41-E15 laptop battery 2600MAH/37WH – 14.52V
    VERTU VBL-02 replacement battery 3080MAH/11.7WH – 3.8V
    Haswell TU131-TS63-74 laptop battery 6000mAh/45wh – 7.4V
    Samsung 4302-001262 laptop battery 2200mAh/24Wh – 11.1V
    Gigabyte GNG-E20 laptop battery 5300mAh/39.22Wh – 7.4V
    Gigabyte NC-H40 laptop battery 4300mAh/63.64Wh – 14.8V
    Sony LIS1569ERPC tablet battery 4500mAh/17.1wh – 3.8V
    NEC PC-VP-BP67 laptop battery 2900mAh/39WH – 14.4V
    BOSE 078592 replacement battery 5500MAH – 14.8V
    Bose 789175 replacement battery 5500MAH/79.2wh – 14.4V
    Bose 63287 replacement battery 2230mAh/17Wh – 7.4V