CrashPlan alternatives: What home users can do, from staying put to exploring other services

The easiest way out (if not the cheapest)? Just upgrade to Crashplan’s business tier.

It’s been a week since CrashPlan decided to call it quits on its personal backup service. But CrashPlan isn’t going away—it’s just ending a program that probably wasn’t profitable. After the initial shock, home users should realize there’s absolutely no reason to panic—or even be hasty. The company will keep your data safe for an extra 60 days past the end of your current subscription, and it will keep its servers online until October 23, 2018. But it’s still a good time to figure out your next move, so we’ll walk you through the options.

CrashPlan option 1: Upgrade to a business plan

You needn’t leave CrashPlan at all if you turn your home plan into a business plan. Just pony up the $10 a month for the small business plan and keep on keepin’ on. The company (Code42) is also offering a 75% discount to users for the first 12 months.

CrashPlan option 2: Free or cheap alternatives

If the business plan doesn’t fit your budget, then what you need to do depends on how you used CrashPlan. If you simply maintained a backup of your current data with the service, you don’t even need to download your backup from CrashPlan. Just start backing up elsewhere.

There are any number of free services for small data sets: 15GB Google Drive, 5GB iCloud, 5GB OneDrive, and 5GB Dropbox. You may also choose from low-cost tiers of pay services, including the one CrashPlan recommends—Carbonite. In fact, Carbonite is offering a 50% discount for CrashPlan users.

CrashPlan option 3: Download archives

If you used CrashPlan for archiving—that is, you stored data on the company’s servers without keeping a local copy—then you’ll need to download that to your local PC before your subscription ends (plus the 60-day extension). The CrashPlan servers might be a tad stressed right after the announcement, but wait a couple of weeks and you should be able to download without undue delay. If you procrastinate, you could always move to the $10-a-month business plan until you got your act together.

CrashPlan option 4: External backup

If CrashPlan was your only backup, now is a good time to consider backing up your backup—combining a cloud service with backup to an external drive. Check out our backup software reviews to find our recommendations.

Note: This article was edited to capitalize the “P” in CrashPlan at the request of the company, as well as to note the one-year 75% discount for exiting users when they change to the business plan.

 

120W ADP-120MH-D AC/DC Laptop AC Adapter for MSI GE60 GE70 19.5V 6.15A

120W Slim ADP-120LH B Laptop AC Adapter for Lenovo Y410P Y510P

200W 19V 10.5A Laptop AC Adapter for Chicony Clevo K790S G7 Z7-S2SP2

200W 19V 10.5V Laptop AC Adapter for Samsung NP700G7A NP700G7C DP700A7D

20Wh 7.4V New Battery Dell TM9HP For Dell Latitude 13 7350 Ultrabo

How to transfer everything from your old Android phone to your new one

Moving to a new phone can be a pain. Android might have the edge over iOS when it comes to tight integration with cloud services, but Google still has a ways to go when it comes to effortlessly transferring all your data off your old phone and onto the new one.

But it has gotten better. You’ll need to rely heavily on Google’s services, of course, but with Android Nougat, moving your personal info has never been easier. It’ll still take a some vigilance and a little work, but you don’t need to be an Android whiz anymore to ensure your data is ready to move the next time a catastrophe hits your phone—or you just really want a new one.

Know your backup options

Before you can do anything, you’ll need to make sure your old phone is signed in to your Google account. It almost certainly is, but head over to the Google tab in Settings to make sure.

Then, you’ll need to find your phone’s backup settings. On Pixel and Nexus devices there’s a Backup & reset option under the Personal tab in Settings, but the location varies on other phones. The easiest way to find it is to type “backup” into the settings search bar.

Once you’re there, you’ll see a couple options. On Pixel and Nexus phones, there’s a Back up to Google Drive switch that will enable several types of content to be backed up, including installed apps and accompanying data, call history, device settings, calendar entries, contacts, photos and videos, and, exclusive to Pixel phones, SMS messages. It’ll be backed up automatically overnight, so once you switch it on, you won’t have to give it another thought.

On other phones, you’ll see a Back up my data toggle. Turning it blue will ensure that your application data, Wi-Fi passwords, and various phone settings are sent to Google servers and at the ready when you sign in to a new phone. This way you won’t have to re-enter passwords to networks you’ve already saved. Yes, that means Google probably has all the world’s Wi-Fi passwords. But that’s a story for another day.

You’ll also see a second toggle called Automatic restore. Turning that one on will restore the data and settings if you decide to reinstall a previously deleted app.

Since backups work through Google Drive, if you head over to the app, you’ll see a Backups option in the sidebar. Inside you’ll see a list of any device that has been backed up, with your current phone occupying the top slot (likely with a funky name like SM-G955U or 2PZC5). Tap it and you’ll be able to see when the last backup took place and which apps were included in it.

Mail, calendar, and contacts

If you don’t want to use Google Drive backups, you can still make sure your most important things make it over when you power on your new phone.

Mail, of course, is the easiest. If you use Gmail, you need only sign in to your Google account to bring over all of your messages. And your other accounts, whether Outlook, iCloud, or Hotmail, will be just as easy. Simply download your favorite app, type in your username and password, and you’ll be on your way. Additionally, there are numerous apps such as Newton and Blue Mail that will keep multiple accounts synced with a single login.

For people and appointments, Google has you covered here, too. Even without a proper Google Drive backup, any entries inputted into Calendar on your phone will automatically appear on your new phone as soon as you open the app. The same is true with Contacts. Whether you’re opening the app itself or using the Phone app, your contact list will be fully synced with your new phone, no matter which phone you’re switching from or to.

Photos and music

Photos are rapidly becoming the one thing that absolutely needs to be transferred from one phone to the next, and Google has built a fantastic way to do it in its Photos app.

Available for all phones, it’s far and away the best photo management option, backups aside, so if you’re not regularly using it, you should be. To make sure it’s backing up everything, head over to the Settings in the sidebar and tap Back up & sync. Make sure the toggle is blue and the backup account is the same as the one you use for everything else.

Google lets you back up as many high-quality photos as you’d like, and it won’t count against your Google Drive storage. If that’s not enough resolution for you, you can opt to back up the full-sized original photos to your Google Drive, but it’ll cost you. While Google gives Pixel users unlimited backups of their original photos, anyone else will have to use their allotted Google Drive space, so you might have to bump up your storage to accommodate the extra gigabytes. Google Drive users only get 15GB free, so if your camera roll is bigger than that, you can pay $1.99 a month for 100GB or $9.99 a month for 1TB of storage. But whichever size you choose, all of your photos will appear when you open the Google Photos app on your new phone.

When it comes to music, there are two ways to do it. If you already subscribe to a streaming service like Spotify, Google Play Music, or Apple Music, just head over to the app in your new phone and sign in to access all of your songs.

But if you aren’t a streamer, Google Play Music will still help you get your groove on, letting you store up to 100,000 tracks for free. To get it to work, you’ll need to head over to the Google Play Music site, sign in with your Google account, and install the Music Manager app on your PC. After you select the source of your tunes, the app does much of the work, uploading whatever it finds and adding it to your music library in the cloud. Big libraries will take a little time, but for the most part the process is simple and speedy.

Then, when you sign into Play Music on your new phone, all your tracks will magically appear. You can choose to keep those songs in the cloud if you’re tight on storage, or download them to your new phone so you can rock out no matter how spotty your signal gets.

Passwords and bookmarks

If you use Chrome on your phone, you can also take your browser history, passwords, and bookmarks to your new phone. First, head over to the Google tab in Settings (on pre-Marshmallow phones it will be a separate app called Google Settings), and scroll down to the Smart Lock for Passwords option.

This settings stores passwords from supporting apps and Chrome sites to your Google account. Switch it on, and the next time you sign into Chrome on your new phone you won’t have to re-enter the same passwords over and over. It works on third-party apps, too, as long as the developers have built in support.

If you’re leery about app passwords being stored in your Google account, you can blacklist any app from using Smart Lock. Or you can forgo it all together and download a password manager. There are plenty of great ones out there, including Dashlane, LastPass, and 1Password, and they’ll all store your passwords in an encrypted locker. Most charge a fee, but it’s worth it.

For the rest of your web needs, head over to the Chrome settings. Tap on your account name and then sync to see everything that you want to store in the cloud, including bookmarks, history, open tabs, and saved credit cards. Once you select the ones you want, they will all be available when you sign into Chrome on your new device.

SMS and MMS messages

This one is a little trickier than the others. If you own a Pixel phone on Android 7.1 or later, there is an option for backing up your SMS messages, though it will leave behind any photos or videos. If you use Allo, you can turn on chat backups in the latest version of the app, and everything will be synced to your new device, including media. And, of course, if you use WhatsApp, Telegram, Facebook Messenger, or some other third-party service, you only need to sign in to the appropriate app to access your full chat history.

But the most fool-proof way to move all of your messages from Android Messages or your text-messaging app of choice to a new phone is an over-the-top service. There are several in the Play Store—SMS Backup+ and SMS Backup & Restore are two of the most popular and highest rated—and they act as a sort of middleman that collects your messages until you’re ready to transfer them to a new app.

It’s not the speediest process, so you’ll need to carve out some time to let it run if you have a lot of messages, but it works quite well. In a recent test, we used SMS Backup+ to back up and restore a batch of more than 2,000 messages on a test device without a problem. It’s baffling why Google hasn’t implemented a similar system in Android, but for now, apps like SMS Backup+ will certainly do the trick.

One word of warning, however: Don’t wipe your old phone until you’re sure your messages have appeared on your new one. This way you’ll be able to start over if something goes awry during the transfer.

Some software to ease the move

Most Android phone makers offer their own helping hands when it comes to moving over your stuff. Granted, they’ll work best when changing to the same brand (like a Galaxy S7 to a Galaxy S8), but they all generally do a fine job.

Samsung offers its own service called Smart Switch that’s now built right into Settings on the Galaxy S8. Turn it on and it will sync the same things Google does (contacts, calendar entries, etc.), plus your notes, alarms, messages, and even your home screen layout to your new phone. It works with non-Samsung phones as well, though it works best if you also use Samsung’s own Galaxy apps.

4300mAh/32WH 7.4V New Battery Dell YN6W9 For 7.4V 32WH

43Wh 11.1V New Battery Dell D2VF9 For Dell Inspiron 15 7547

4400mah 11.1V New Battery ACER UM09A71 For Acer Aspire One ZA3 ZG8

45W Type-C Laptop AC Adapter for ASUS ZenBook 3 UX390 UX390U UX390UA

5000mAh/6Cell 11.1V New Battery Acer AL14A32 For Acer ASPIRE E5-521 ASPIRE E5-521G ASPIRE E5-531

Google’s Tango becomes ARCore: Phone AR for the masses

For the past year or so, Google’s augmented-reality aspirations have been extremely modest, with its Tango AR platform running on just two phones (and one of them just came out a couple weeks ago.) But now Google is releasing ARCore, which will bring the power of Tango to millions more Android phones.

Like Apple’s ARKit, ARCore works without any additional hardware. The launch of the developer preview will be limited to Pixel and Galaxy S8 phones running Nougat and above, but Google is aiming to get ARCore on 100 million devices from Samsung, Huawei, LG, Asus, and others by the time the preview ends later this year.

Reality check: ARCore may be bad news for Asus and its new Zenfone AR, which will now be less special, but it’s great news for everyone else. AR is a far more interesting platform than VR, if for no other reason than you don’t need any additional hardware to use it. But AR is also a more viable platform for everyday use. While the full immersion of a VR headset may have a higher wow factor than AR, the practicality of augmented reality—measuring, shopping, traveling, and performing other actions atop the real world—are greater. By putting real AR in the hands of millions of users (not just Pokemon Go), Google will put the platform on fast forward, and it won’t be long before it’s more than just a parlor trick.

A new reality

Like Tango, the ARKCore SDK works with Java/OpenGL, Unity and Unreal, and focuses on three core areas: motion tracking, environmental understanding, and light estimation. In practice, that means objects will scan your surroundings to figure out the best surfaces for placement, study the light to approximate shadows, and adjust position as you move.

It’s all the things Tango does (minus the depth sensing), except you won’t need a dedicated phone with a fancy camera anymore. Google is even releasing a prototype browser for web developers to play around with, too. And as announced at I/O, the company is still working on its larger-scale Visual Positioning Service, which will enable “world scale AR experiences” for indoor mapping, among other things.

Even in preview mode, ARCore is a huge step for AR on Android. Not only does it mean that AR will no longer be limited to such a small subset of users, it’s also sure to bring an influx of apps ready to take advantage of the platform. While there are some good Tango apps in the Play Store, they are few and far between, mainly because the audience was so small. With a larger reach, developers will surely pick up the pace.

This also puts Google on even footing with Apple. Ever since WWDC, Apple has been spotlighting things iOS developers have been creating with ARKit, and to put it mildly, they’ve been running circles around Tango. With a platform built for all, AR could quickly become a new battleground for the two companies.

ARCore is available for developers who have a Pixel or Galaxy S8 beginning today, and Google promises it will “have more to share later this year.

4300mAh/32WH 7.4V New Battery Dell YN6W9 For 7.4V 32WH

43Wh 11.1V New Battery Dell D2VF9 For Dell Inspiron 15 7547

4400mah 11.1V New Battery ACER UM09A71 For Acer Aspire One ZA3 ZG8

45W Type-C Laptop AC Adapter for ASUS ZenBook 3 UX390 UX390U UX390UA

5000mAh/6Cell 11.1V New Battery Acer AL14A32 For Acer ASPIRE E5-521 ASPIRE E5-521G ASPIRE E5-531

8 cool Android Nougat features you’re probably not using

Google used to produce a rather bare-bones version of Android, counting on OEMs like Samsung and LG to add in all the other cool features people might want. But today’s stock Android is more powerful, more feature-rich, and more attractive without any help from the device makers.

Android Nougat beauty

In fact, Google has pushed OEMs to use even more of the basic Android experience without making unnecessary changes. This could mean some awesome features are lurking inside your phone that you don’t even know about. So here are eight cool features inside Nougat (Android 7.0) you’re probably not using.

Split-screen Chrome

Android 7.0’s split-screen app capabilities are well known, but there’s one app that includes a very cool and useful feature that isn’t so obvious: The Chrome browser lets you run two different tabs on the screen at once.

To run two webpages in split-screen, open Chrome and ensure you’ve got at least two tabs open. Long-press your Android overview button (it’s the one shaped like a square, right next to the home button) to launch split-screen mode as you normally would. Now tap the overflow menu button in Chrome, and select “Move to other window” (see screenshot above).

The tab you have up will move over to the other side of the split as a second instance of Chrome. When you’re done, exit split-screen mode by dragging the divider to one side. The tab will go back into your single Chrome instance. You can also close the tab and open a different app in split-screen mode.

Clear all apps in multitasking

Sometimes you just need to start fresh in your overview screen, or shoo away all those open apps. Not all Android devices offered a quick way to do that before, but as of Android 7.0, there’s a proper “clear all” option for the overview list on all devices.

Some OEMs like Samsung and LG make the Clear All button very accessible at the bottom of the screen—maybe even too accessible, as you can accidentally hit it and close all your open apps. On Google’s build of Android (and those based closely on it, like Motorola’s), you can find a Clear All option at the top of your stack of apps. Just scroll all the way up, and you can press the button to remove all apps. Importantly, this does not clear background tasks—it only ends user-facing activity.

Third-party quick settings

All phones and tablets running Android 7.0 include a customizable quick settings panel. However, there’s another aspect of this feature that might interest you. You can also use third-party quick settings tiles on any device. To find out if you have any, open the quick settings and tap the edit button (it looks like a pencil).

Below the main list of settings is a selection of unused tiles. Any apps you’ve installed that have their own quick settings tiles will show up here. You can long-press and drag to add or remove apps. You can get quick access to things like VPN connections (PIA), a Twitter client (Flamingo), and a variety of custom settings (Tile Extension for Nougat).

App install source

Google has gradually been beefing up the information available in your app settings interface. Nougat added a particularly cool new feature: You can now see where an app came from—Google Play or a sideloaded APK.

To find this bit of info, open your system settings and select “Apps.” Pick any app in the list and scroll down to the bottom of the info screen. It will say either “App installed from Package Installer,” or “App installed from Google Play Store.” For those apps installed via the Play Store, you can tap the embedded link to go right to the app’s listing in the Play Store. The package installer link for sideloaded apps won’t do anything, though.

Quick app switching

Google revamped the multitasking interface back in Lollipop, but Android 7.0 offers a new, faster way to flip between apps. If you need to get back to the last app you had open, you don’t have to tap on the card in the overview screen.

Just double-tap the overview button, and you’ll switch to the last app. Do it again, and you’ll return to the app you just left. This should work on all Android devices running Nougat or higher.

App shortcuts

Google’s new app shortcuts (previously known as launcher shortcuts) are one of the few new features that rolled out as part of Android 7.1 Nougat. That means phones and tablets on 7.0 won’t have them. But for those devices that do have app shortcuts, you now have faster access to useful menus and features right from your home screen. All it takes is a long-press on the app icon.

With the long-press menu up, you can tap on the list of shortcuts to open the app to the corresponding screen or action. For example, Google Drive has search, scan, and upload as app shortcut options. Settings has battery, data usage and Wi-Fi. The phone dialer will show you options for frequent contacts.

There’s another layer here: If you find yourself often going to the same place and doing the same thing in an app, you can make the long-press app shortcut into a regular home screen shortcut. Simply long-press on one of the shortcuts and drag it out of the pop-up menu. It becomes an icon that you can drop anyplace you want, and then launch it with a tap.

Pin apps to share menu

The Android share menu makes it easy to push links and files from one app to another. However, if you have a lot of apps installed, the list of apps and actions in the menu can get rather ungainly. There’s a little-known feature in Nougat that can help: If you’re frequently using the same few apps in the share menu, long-press on them in the menu. You get a popup that offers to link the app info settings or pin the app.

Pinned actions in the share menu always appear at the top of the list for easier access. But be aware, this works only in the native Android share menu. If an app implements its own version of the share activity, your pinned apps may not be visible at the top.

Data saver

Most of us have to live with capped mobile data plans, but Android 7.0 added a new feature that can help you stay under the cap. The aptly named Data Saver feature is available on virtually all Nougat phones under the Data Usage settings menu. Data Saver lowers your mobile data usage by preventing apps from using data in the background. Just turn it on, and apps will pull down bytes only when you’re actively using them.

All phones have at least a few apps and services that are exempted from the Data Saver restrictions. You can see which ones have unrestricted access in the Data Saver settings (they’re usually Google Play Services, notification handlers, and other system components). You can turn unrestricted access on or off for any app, but be aware you might break things.

There’s still a lot of neat stuff lurking inside Nougat. And with Android O just around the corner, just think of all the surprises to come.

4300mAh/32WH 7.4V New Battery Dell YN6W9 For 7.4V 32WH

43Wh 11.1V New Battery Dell D2VF9 For Dell Inspiron 15 7547

4400mah 11.1V New Battery ACER UM09A71 For Acer Aspire One ZA3 ZG8

45W Type-C Laptop AC Adapter for ASUS ZenBook 3 UX390 UX390U UX390UA

5000mAh/6Cell 11.1V New Battery Acer AL14A32 For Acer ASPIRE E5-521 ASPIRE E5-521G ASPIRE E5-531

How to test your home internet connection speed

Testing your internet connection’s performance is a straightforward exercise. You don’t need any extra software—all you need is a computer with a web browser. But there are also a few things you can do to make sure you are getting the most accurate reading of your internet connection. Here’s what to do.

Get ready

For best results, you want to use a wired connection if at all possible; that way, you don’t have to worry about interference and performance fluctuations that can occur while you’re on Wi-Fi. If you have any other wired devices on your home network, plug your test computer directly into the modem so those don’t interfere in your testing.

If you’re stuck using Wi-Fi—say, you have a MacBook Air or a tablet or some other device that doesn’t have an ethernet port—do what you can to minimize interference. Make sure your Wi-Fi router is away from other electronic devices like cordless phones, and temporarily disconnect any other devices from your Wi-Fi network—after all, you don’t want another computer on your network to download a gigabyte worth of software updates while you run your tests.

While you’re at it, double-check to make sure your computer isn’t downloading something in the background. Check the Task Manager on Windows (summoned by pressing control-alt-delete) or Activity Monitor on MacOS, and look for network statistics (it’s labelled “Network”on MacOS, “Networking” on Windows).

Close or quit all apps on your computer to keep apps from downloading software updates while you test your connection. Your bandwidth usage may not drop to zero and stay there, but you want it as close to zero as it’ll get. If your operating system is downloading updates, there isn’t much you can do aside from wait and test your connection later.

If you’re having any problems with your connection, now is a good idea to reset your modem and router. Switch them off and unplug them for a few moments, then plug them back in and switch them on.

Test your connection

Ookla’s Speedtest.net is the most common site to test your internet connection; all you need is a web browser with JavaScript turned on (it usually is unless you switched it off) and Adobe Flash installed. There are a couple of alternatives if you don’t have Flash installed (and don’t want it installed). There’s an HTML 5 version of Ookla’s Speedtest.net, or you can use Speedof.me, which also uses HTML 5.

All you have to do at this point is click the green “Begin Test” button, and Speedtest.net will check both your download and upload speed. This may take anywhere from a few seconds to a few minutes, depending on your network speed.

Those aren’t your only options for testing your broadband connection; MegaPath also offers a speed test, as well as what it calls Speed Test Plus, which evaluates the quality of your connection in addition to its raw speed. Your ISP might also offer a speed test tool, though you may need to do a little poking around for it. And router manufacturers are increasingly including speed tests in their products’ firmware and/or the mobile apps they distribute with their products (although in that latter case, you’ll be using a wireless connection).

Isolate the problem

Don’t be surprised if you’re not getting the top speed your ISP says it can deliver—almost no one does. But if your connection is significantly slower than what was promised, many different factors could be coming into play. There might be a problem with your equipment, or it could be an issue on your ISP’s end. Most ISPs maintain a tech-support page where you can go to see if they’re aware of any problems with their service. This link will take you to the location of AT&T’s DSL troubleshooter.

If your ISP isn’t reporting a problem, you can start your own troubleshooting by eliminating your equipment as a factor. First try using a different computer. If you get acceptable performance on the second machine, you can’t blame the ISP. If the second computer also has a slow internet connection, run another bandwidth test after each of these suggestions: Try using a different ethernet cable to connect your PC to your router. Try swapping out the cable that connects your router to your internet gateway (your DSL, fiber, or cable modem). Troubleshoot your router: Turn it off or unplug it for a minute or two and then turn it back on. You should always be running the latest firmware on your router, so this is a good time to update it if you haven’t lately. If you’re still not seeing an improvement, try power-cycling your DSL, cable, or fiber modem.

If you’ve jumped through all of those hoops, and you’re still have performance issues, it’s time to call your ISP’s tech-support line.

4300mAh/32WH 7.4V New Battery Dell YN6W9 For 7.4V 32WH

43Wh 11.1V New Battery Dell D2VF9 For Dell Inspiron 15 7547

4400mah 11.1V New Battery ACER UM09A71 For Acer Aspire One ZA3 ZG8

45W Type-C Laptop AC Adapter for ASUS ZenBook 3 UX390 UX390U UX390UA

5000mAh/6Cell 11.1V New Battery Acer AL14A32 For Acer ASPIRE E5-521 ASPIRE E5-521G ASPIRE E5-531

The Asus ZenBook Flip S is the world’s thinnest laptop

The Asus ZenBook Flip S is the thinnest convertible laptop in the world–at least for now. Announced Monday at Computex in Taipei, the ZenBook Flip S is the latest to snatch the trophy as vendors wage an eternal battle to shave down their portable PCs. The 10.9-millimeter profile of the ZenBook Flip S currently takes the record. The laptop will be available later this year at prices starting at $1,099. Read more about it below, and also two other slender notebooks Asus announced at its Monday event at Computex in Taipei.

Thin is always in

Asus was very specific in showing how thin the ZenBook Flip S is compared to the competition. Chairman Jonney Shih laid it out in his presentation:

HP Spectre x360: 13.8mm

MacBook Air: 17mm

MacBook: 13.1mm

ZenBook Flip S: 10.9mm

At just 2.4 pounds, the Zenbook Flip S is also lighter than the HP Spectre x360 and the MacBook Air, though not the 2-pound MacBook. Yet it packs the heavyweight punch of Intel’s Corei7-7500U processor and can accommodate up to a terabyte of PCIe SSD storage.

Like all convertibles, the screen can be folded all the way around and the laptop used in a tablet configuration. The touch display has a 4K resolution (3,840×2,160 pixels) and support for Windows Ink with an optional Asus Pen. Corning’s Gorilla Glass adds durability. When the screen unfolds past 135 degrees, the hinge props up the keyboard from the back to create a more comfortable angle for typing.

The computer’s accessories include a tiny fingerprint sensor for one-touch login via Windows Hello in laptop or tablet mode. There are a couple of USB-C ports and support for fast charging. Asus says the battery will last for 11.5 hours and can be fast-charged to 60 percent of capacity—about 7 hours—in just 49 minutes.

Asus ZenBook 3 Deluxe

170529 zenbook 3 deluxe

Asus has upgraded its ZenBook 3 laptop with a new model that carries the “Deluxe” name. The UX490 is the thinnest 14-inch laptop on the market at 12.9 millimeters thick, according to Asus.

It weighs 2.4 pounds and is the first laptop to feature Corning’s Gorilla Glass 5, the latest version of the popular impact-resistant glass, Asus said. The company said it can support up to 9 hours of battery life and will be available at prices starting from $1,199.

Like the Flip S, the computer is based on a Core i7 processor and has up to 1TB of PCIe SSD storage. The twin USB-C ports support Thunderbolt 3, so dual 4K monitors could be hooked up, but the laptop itself offers just a Full HD (1,920×1,080 pixels) panel.

For gaming-level graphics performance, the laptop can be connected to the Asus ROG XG Station 2 external graphics dock, which can support cards as large and hot as the NVidia GTX 1080.

Asus ZenBook Pro

asus zenbook pro ux550 blue 07

The third addition is the ZenBook Pro UX550. Starting at $1,299, it’s based around the Intel Core i7-7700HQ quad-core processor and an Nvidia GeForce GTX 1050Ti graphics card.

It’s both thinner and lighter than previous ZenBook Pro machines at 18.9 millimeters and just under 4 pounds. It has a spacious 15.6-inch 4K screen. Asus has found room for a four-speaker audio system, battery life is an impressive 14 hours according to Asus, and it comes with a fingerprint sensor for Windows Hello biometric login.

4300mAh/32WH 7.4V New Battery Dell YN6W9 For 7.4V 32WH

43Wh 11.1V New Battery Dell D2VF9 For Dell Inspiron 15 7547

4400mah 11.1V New Battery ACER UM09A71 For Acer Aspire One ZA3 ZG8

45W Type-C Laptop AC Adapter for ASUS ZenBook 3 UX390 UX390U UX390ua

Gmail for Android: 6 awesome features you probably aren’t using

gmail hero

The Gmail app has been on Android literally since the beginning, but it’s gotten much more powerful over the years. Today, the app does so many things, it can be hard to keep track of them all. Now, you don’t have to know everything Gmail can do in order to improve your efficiency, so here are the six most useful Gmail features you probably aren’t using.

Gmail Smart Replies

When Google’s Inbox app came out a few years ago, it offered a different approach to email with various “smart” features like bundles, reminders, and Smart Replies. Now Smart Replies is available directly in Gmail, and you might not understand how useful this feature can be if you haven’t also used Inbox.

Smart Replies appear at the bottom of emails you receive based on the context of the message. Not all emails will have them, and you have to scroll down through long messages to find them. Smart Replies show up as three phrases in blue boxes. The phrases are simple responses like “You’re welcome,” and “Sure, I’d be happy to chat.”

Tapping on a blue reply won’t instantly send a message, so don’t be afraid to make use of them. The Smart Reply is dropped into a new email reply so you can add to it, or edit as you see fit. There are no settings to play with here—Smart Replies are active for everyone.

Change your default swipe action to delete

Consider this two tips in one—there are swipe actions in Gmail, and you can change what that swipe does. In your inbox view, just swipe left or right to act on a message. If you haven’t made any changes to the settings, swiping an email will archive it.

Should you want a more permanent solution, head into your Gmail settings and find General settings > Gmail default action. In this popup, you can choose between archive and delete. If you pick delete, all the conversations you swipe away will be deleted immediately. The settings also contain a toggle to turn off swipe actions.

Gmail text formatting

Gmail on the desktop includes various formatting tools, but you don’t need to run over to a computer to make your emails prettier. The Gmail app includes formatting options to—they’re just a bit hidden. To format a block of text, long-press to select it, and one of the options in the popup should be “formatting.”

The formatting option opens up a toolbar above your keyboard with all the standard formatting tools including bold, italic, underline, color, and so on. This bar remains active as you compose the email, unless you decide to close it by tapping the “x” on the far right. So, the formatting options don’t only apply to the test you originally selected. You can clear your selection, pick different text, and apply formatting options to that.

Default reply action

We’ve all made the mistake of responding to an email when we should have used reply-all. In fact, that’s usually the right course of action when there are multiple people included in an email chain. Changing one setting in Gmail ensures you’ll never forget to reply-all again.

Open your Gmail settings and find “default reply action” under “General settings.” It includes options for “reply” and “reply-all,” with “reply” being the default. Simply pick “reply-all” and the button at the top of emails will automatically become reply-all when there are multiple people in the conversation. You can always tap on the address field while composing to remove people.

Attach money directly in a Gmail

If you own someone a few bucks, paying them back is as simple as sending an email. First, you’ll need to make sure you’ve set up an account with Google Wallet. You can fund Google Wallet with a debit card or bank account, but the Wallet app really isn’t needed at all for this Gmail feature.

To send money, begin composing a new email, and tap the “Attach” paperclip button at the top of Gmail. Select “Send money” and input an amount. Gmail also includes the option to add a memo to your payment. The money shows up as an attachment to the email, which you can edit by tapping. The attachment can be removed if you change your mind as well.

The recipient does not need to have a Wallet account ahead of time. They’ll be able to sign in with their Google account and designate a default account. Then, the money is cashed out. Future payments will be deposited automatically.

Custom notifications

Gmail’s system of labels lets you meticulously organize your mail, but it can also help you cut down on excessive notifications. You should set up a few labels in Gmail, but you can tweak notifications in the app even if you only use the default labels.

To cut through the noise, you need to open the Gmail settings and go to [Your account name] > Manage labels. Only the top few items in this list will be synced, including the Primary label containing most of your mail. That’s also the one set to trigger notifications. You can disable the notification on Primary, and turn it on only for the labels you want, though. For instance, tap on “Important,” turn on sync, and choose your notification settings. You can make the same change for any custom labels you’ve set up, too.

Remember, other labels will still sync unless you turn them off. Thus, the messages will be available when you open the app. If some of your labels are of particular importance, you can also set them to notify on every new message instead of just once per label.

The Gmail app is only going to get more powerful as time goes on, but these tips should get you well on the way to mastering it.

6 ways to make the most of Android’s Clock app

Who needs an alarm clock when you’ve got your Android phone handy? In the past year or so that I’ve relied on the Clock app on my Nexus 5X, I’ve rarely overslept. Now that I’ve got the hang of the Clock app’s various features and foibles, I’m close to replacing that “rarely” qualifier with a “never.”

6 ways to make the most of Android's Clock app

Read on for six eye-opening tips and tricks for the Android Clock app, from setting alarm tones that gradually increase in volume to making sure your Do Not Disturb rules don’t override your morning wake-up alarm. (For the basics on setting alarms on your Android phone, click here.)

Note: I tested these tips on a Nexus 5X running on Android version 7.1.2. Your settings and features may vary depending on the make and model of your phone.

Open the clock app with a single tap

The Android Clock app isn’t the sexiest app on my Nexus phone, but it’s certainly in the top five when it comes to apps I use the most—and given that, I hate having to dig around the Android app drawer to find it.

Luckily, there’s a handy one-tap shortcut to the Clock app, and it’s probably already sitting on your home screen.

Just tap the Clock widget—the one that looks like a digital or analog clock face—and you’ll jump immediately to the Clock app. That may sound obvious, but I only discovered the shortcut myself a few weeks ago, and I can’t believe I’d missed it so long. (If you’re not already using the Clock widget, just tap and hold a blank space on the Android home screen, tap Widgets, then install a Clock widget by tapping its icon.)

Use the clock as your screensaver

When I get up in the middle of the night (the older I get, the more it happens), I like taking a peek at the time—and I’d rather do it without having to click a button on my Android phone.

That’s why I love using the Clock app as my Android screensaver. Now, whenever I’ve got my Android phone docked or plugged into a charger, the current time flashes on the screen of my handset, and there’s even a night mode that keeps the screen relatively dim while leaving the clock visible.

The trick: Tap Settings > Display > Screen saver, select the Clock option, then tap the Settings button (the one shaped like a gear) to pick the style of the screensaver clock (analog or digital) and to toggle “night mode” on and off.

Gradually increase sound of alarm

For some deep sleepers, nothing short of a blaring alarm will wake them up. For me, it takes a lot less—indeed, just the sound of my Android phone vibrating can rouse me.

That’s why I’m a fan of the Clock app’s “Gradually increase volume” setting. Turn it on, and your alarm tone will start off whisper quiet, then slowly build until it reaches full volume, perfect for those of us who prefer a gentler wake-up call.

To turn on the setting, open the Clock app, tap the three-dot menu button in the top-right corner of the screen, tap Gradually increase volume, then pick how long you’d like the effect to last—anywhere from five seconds to a full minute.

Use any sound file as an alarm tone

Nope, you don’t have to wake up to a canned Android alarm tone. As it happens, you can set the Clock app to rouse you with any song or sound you want, from Van Halen’s “Jump” to a sound file you grabbed from the web.

Just open an alarm in the Clock app, tap the Alarm sound setting (the one that looks like an alarm bell), then tap Add new. Doing so will open the Downloads browser—and from there, you can pick any sound file in the Audio folder, or one you’ve saved in Google Drive.

Manage Do Not Disturb mode

If you’re wondering how you overslept an Android alarm, Android’s Do Not Disturb feature is a likely culprit. When it’s set to “Total Silence” mode, Do Not Disturb will muzzle all Android notifications and alerts, including alarms.

The good news is that Android does a pretty good job of warning you if you’re about to override an alarm by switching on Do Not Disturb mode manually. The bad news? It’s easy to get tripped up by Do Not Disturb’s “automatic rules,” which can easily muzzle your alarm clock if you’re not careful.

When creating an automatic Do Not Disturb rule (which you can do by tapping Settings > Sounds > Do Not Disturb > Automatic rules) and you’ve set Do Not Disturb to “Total Silence” mode, consider enabling the Alarm can override end time setting—or, better still, switch from Total Silence mode to Alarms only.

If you don’t, just know that any alarms you set during a particular automatic rule period won’t go off, meaning you may doze right through any early-morning meetings.

Silence an alarm after a set amount of time

One of the pitfalls of getting up early is forgetting to switch your alarm off—something you may realize when you step out of the shower and hear your alarm wailing…and wailing, and wailing.

As long as you’re not one of those deep sleepers who won’t wake up unless the alarm has been blaring for half an hour, you might want to set your Android alarm to turn itself off automatically after a brief period of time.

Open the Clock app, tap the three-dot menu button, tap Settings > Silence after, then pick a setting (up to 25 minutes).

OnePlus 5: Everything you need to know about the mid-range flagship

The original flagship killer is back with, well, another flagship killer. After weeks of leaks and rumors, OnePlus has released its sixth handset, the OnePlus 5, and it has the major Android players in its sights: the LG G6, Galaxy S8, and HTC U11.

oneplus 5 back

And it looks to be a formidable competitor. Packing the fastest processor around in the Snapdragon 835, up to 8GB of RAM, a 3,300mAh battery, and dual cameras, the OnePlus 5 fills out the spec sheet for less. Here’s everything you need to know, including our full review of the OnePlus 5.

OnePlus 5 specs

  • Display:5-inch 1080p Full HD AMOLED, 401ppi
  • Dimensions:7 x 74.7 x 7.25 mm
  • Weight: 153g
  • Color: Midnight black, slate gray
  • Operating system: OxygenOS based on Android 7.1.1 Nougat
  • CPU: Qualcomm Snapdragon 835 (octo-core, 10nm, up to 2.45GHz)
  • GPU: Adreno 540
  • Rear camera: 16MP, f/1.7 + 20MP f/2.6
  • Front camera: 16MP, f/2.0
  • RAM: 6GB/8GB LPDDR4X
  • Storage: 64GB/128GB UFS 2.1 2-LANE
  • Ports: USB C, dual nano-SIM slot, 3.5mm audio jack
  • Battery: 3,300mAh

OnePlus 5 price and release date

The OnePlus 5 was released in June 27, 2017, and is available for purchase through OnePlus’s website. The gray model with 64GB of storage and 6GB of RAM costs $479, and the black model with 128GB of storage and 8GB of RAM will set you back $539. Like OnePlus’s other handsets, the 5 won’t be available through carriers, though OnePlus is calling it a “true world phone,” with support for 34 networks across the globe.

OnePlus 5 review

The OnePlus 5 is a major improvement over the 3 and 3T, but nearly all of the changes are on the inside. That means you’re getting the same display as last year at a higher price. So while it’s still a good deal, it’s not quite the killer bargain it was last year. There’s a lot more to it, so read our review for the full details.

OnePlus 5 display and design

At 7.25mm thick, the OnePlus 5 is the thinnest phone OnePlus has made. It has moved the camera to the upper-left corner like the iPhone rather than keeping it centered, and the antenna lines remain, meaning the back is made of aluminum and not glass.

Around the front, OnePlus has resisted the bezel-trimming trend. It looks almost exactly like the 3T, with the same 5.5-inch Full HD 1920×1080 resolution display and pill-shaped home button/fingerprint sensor. Thankfully, it also still has the 3.5mm headphone jack on the bottom edge of the device and an alert slider on the left side. It is available in three color options, depending on options. Both models are available in a slate gray color, but to get it in soft gold you’ll need to choose the 64GB model, while the 128GB version is available in an exclusive midnight black color.

OnePlus 5 performance and battery

OnePlus has always packed its flagship handset with the latest silicone, and the Snapdragon 835 inside the OnePlus 5 is a screamer. Elsewhere, the phone brings 6GB or 8GB of RAM, 64GB or 128GB of UFS 2.1 storage, Bluetooth 5, and a 3,300mAh battery.

While the battery is smaller than the one in last year’s 3T, it’s more than big enough to get through a full day of use. Plus, the 5 uses OnePlus’ proprietary Dash Charge system to power up quicker than its competitors. However, since the OnePlus 5 has an aluminum back, it doesn’t support wireless charging like the S8 and G6.

OnePlus 5 camera

OnePlus has hyped the heck out of the camera in the OnePlus 5. It ditches the older version’s single shooter in favor of a dual-camera system, pairing a custom Sony IMX398 16MP sensor with a large f/1.7 aperture with a 20MP telephoto one. Around the front you get a 16MP lens with f/2.0 aperture.

oneplus 5 camera

The system brings Fast AF and Smart Capture that will let you take shots instantaneously while filtering out noise and inconsistencies in low-light situations, as well as improved HDR and a portrait mode that simulates a depth of field. It also features 1.6x optical zoom (up to 8x when combined with the digital zoom) and a pro mode that includes a tiny histogram so you can fine-tune the pixels. Notably neither lens features optical image stabilization.

OnePlus 5 OS

The OnePlus 5 runs OxygenOS based on Android 7.1.1 Nougat. Previous iterations haven’t strayed too far from stock Android, and the OnePlus 5’s version is no different. But there are some new features.

oneplus 5 os

As you use it, it will learn your habits and prioritize your apps accordingly on a new quick-launch area of the Shelf. A Do Not Disturb mode just for gaming will block notifications and disable the soft buttons for an uninterrupted experience. Secure Box lets you lock up documents, photos, and videos behind a fingerprint- or pin-protected folder. And a new Reading Mode will optimize the display in apps like Amazon’s Kindle reader to make words easier on your eyes.

FAQ

What happened to the OnePlus 4?

There’s a reason OnePlus has jumped from the 3T to the 5. In Chinese culture, the number four is considered unlucky, like the number 13 in the U.S. This is due to the Chinese phonetic pronunciation of the number four being like the word for death and suffering. Many elevators in China skip the fourth floor, much like U.S. hotels often jump from floor 12 to 14.

What’s in the box?

You get a Dash charger and a cable, along with a SIM ejector tool. That’s it. OnePlus still doesn’t include a free set of earbuds, though you can buy a pair from the OnePlus site for $20.

Are there any cases available?

Yes! Just like its previous phones, OnePlus is selling a series of case available in faux wood, carbon fiber, and sandstone. Additionally, there’s a flip cover and an official Otterbox case in black or red.

Can I bring an SD card?

Sadly, no. While there are two nano SIM slots in the SIM tray, the OnePlus 5 doesn’t support SD cards for storage. So you might want to splurge on the bigger model if space is a concern.

How does Dash Charge work?

OnePlus supplies a proprietary cable and a plug that is needed for Dash Charging. But since the OnePlus 5 doesn’t support the Quick Charge standard on the S8 and LG G6, if you don’t use the supplied cable and plug, the phone will charge as normal.

I’m a Verizon customer. Will it work for me?

Nope. While the OnePlus 5 supports more bands than ever, Verizon’s isn’t one of them. And neither is Sprint’s. So unless you want to switch to AT&T or T-Mobile, you’re out of luck.

Microsoft pushes Windows mixed reality with two tiers of PCs and a Halo game tease

Microsoft mixed reality headsets

Microsoft’s bid to bring Windows mixed reality to the masses is taking shape with a raft of affordable PCs. On Monday the company announced that its hardware partners will launch two types of mixed-reality PCs this holiday season, showing them off first at the IFA show this week in Berlin. The company also said its mixed-reality content would include Steam’s VR games and even some sort of Halo experience.

Microsoft has spent much of this year building up its mixed-reality ecosystem. The company has promised that mixed reality will be a key part of the Windows 10 Fall Creators Update. Working in concert, its hardware partners—HP, Lenovo, Dell, and Acer—plan to launch mixed-reality devices in time for the holidays.

Pricing is important: Acer’s headset, for instance, will be available for $299 without the controllers, undercutting the HTC Vive and Oculus Rift. At its Build conference in May, Acer announced a $399 bundle of headset plus a set of motion controllers. Dell, announced that its own mixed-reality head-mounted display, the Dell Visor, will ship for $350 for just the headset, $100 for the controllers, and $450 for a bundle of all of them. Dell’s headset boasts a flip-up visor, and the controllers feature a thumb stick and buttons, according to Dell. Though all of Microsoft’s headsets are tethered to a PC via an HDMI cord, they can track movements in space without the need for external sensors.

Meanwhile, prices of mixed-reality-capable PCs begin at $499. Microsoft’s partners have yet to announce further specifics on those PCs, but we do knows they’ll be classified into two tiers. Windows Mixed Reality PCs with integrated graphics will run at up to 60 frames per second, while Windows Mixed Reality Ultra PCs with discrete graphics will provide up to 90 frames per second.

Why this matters: With mixed and virtual reality, vertigo is a real concern. A guaranteed 60fps experience might be tolerable for certain applications, provided you don’t move you head around too quickly. You’ll really want a PC with discrete graphics—an Ultra PC—for the best experience. Providing PCs purpose-built for mixed reality could help build user interest.

Microsoft tips some MR content partners

Microsoft released a sizzle reel of some of the available apps, which include Dreams of Dali, SuperHot VR, and GoPro 360-degree videos, among others. Microsoft said that “Steam content will also run on Windows Mixed Reality headsets,” though didn’t provide further clarification.

Microsoft also published a graphic of some of the developers who will be publishing apps to mixed reality. Note that they include a number of developers who already have published virtual-reality apps, or just apps for Windows.

One of those developers, Microsoft said, will be 343 Industries, the developers of the Halo series of games. There will be a Halo mixed-reality experience, Microsoft promised, without delving into more details.

Alex Kipman, the technical fellow at Microsoft who helped launch the HoloLens two years ago, called Microsoft’s reveal a “sneak peek into what you can expect this holiday,” he wrote in a blog post. “We are just getting started and we are honored to work with world class creators and developers.”