How to troubleshoot a CMOS Battery problem

Laptop computers, like their desktop counterparts, typically contain a CMOS, or complementary metal-oxide-semiconductor, battery. This battery is mounted on the mother board, and retains the BIOS information of your machine when it is completely powered down, as well as maintains the date and time information, and backs up what is on your RAM in the case of a power interruption.

A CMOS battery typically lasts between four and seven years in a computer before it begins to die, however system trauma or a defective battery can, rarely, cause a battery to malfunction well before its time. You’ll know when your CMOS battery has gone bad when you see messages that mention something like “CMOS checksum error” or a similarly described problem. Oftentimes, you will see this error reporting infrequently on boot up, indicating that the battery is dying but not yet completely gone. This is the ideal time to replace the battery. However, if you get the error every time you boot, the battery is likely completely dead, and you may have lost your BIOS settings along with some other system information.

Before removing a CMOS battery for replacement, be sure to enter set up mode on your computer, and copy down all of the settings in your BIOS menus. This is what is stored on that battery, and when you remove that battery, that data will be erased. After replacing with a new battery however, you can go into BIOS and restore those settings from your copy. Also, some programs will back up your BIOS settings to an external disk of some sort, allowing you to reload them at any time.

In laptops, CMOS batteries are typically found beneath the keyboard. This can pose a challenge, as the keyboard on a laptop can be difficult and delicate to remove. It is also important to note that on some models, the CMOS battery is actually soldered to the mother board, in which case you will not be able to remove the battery without professional assistance, either through a repair company or the manufacturer. In laptops with removable batteries, there will typically be a tension clip holding it in place. Simply open the clip, remove the battery, and replace it with a new one. Make sure however that the new battery matches the replaced battery. Consult your computer’s hardware manual or a local or online retailer to be sure you get a direct replacement that will function with your mother board.

Top Causes of overheating in Laptop Computers

An overheating laptop can not only damage the laptop and its internal components, leading to costly repairs, but in extreme cases, it can even cause burns and other safety concerns. For these reasons, it is a good idea to take a few precautions to keep your laptop or notebook running as cool as possible. Here are a few of the top causes of overheating in laptop computers, and a few ways to prevent or resolve them.

Dust

When a laptop overheats, it is most likely caused by dust or other obstructions preventing air from flowing in and out of the laptop. Laptops generally have a cooling system that relies on a fan circulating air into and out of the laptop, and taking heat with it. When there is dust, dirt, or another obstruction blocking the vents, the heat can collect and cause the machine to overheat. Use a can of compressed air to gently blow the dust out of any vents you have access to, or have a repair shop clean out your laptop professionally to resolve this issue.

Malfunctioning Fan

As mentioned above, the fan is responsible for circulating cool air into the laptop, and blowing hot air out. If the fan starts to malfunction, heat can collect and cause the laptop to overheat. If you suspect your fan is malfunctioning, search for a replacement part and instructions online, or take it to a professional repair shop to have the fan replaced before it causes more damage to your laptop.

Poor Heat Sink

In many cases, the heat sink for the CPU of the laptop can become dislodged, no longer providing adequate cooling. In other cases, poor design provides inadequate cooling for the laptop. If you suspect your CPU is overheating, check with the manufacturer as many have implemented recalls of laptops due to design defects which caused overheating. You may be eligible for a free repair or replacement.

Taking a few moments to prevent overheating in your laptop can save you costly repairs and downtime in the future. By following the suggestions above, you can help your laptop to run cooler and more efficient for many years to come.

Simple Steps to Speed Up Your Laptop

Your laptop, like all computers, is likely to become a little slower the longer it is in operation. Many users think the best solution to this problem is to get a new laptop, but there are some things you can do to reclaim some lost performance and speed. Here are a few simple steps to speed up your laptop.

  1. Uninstall Unnecessary Software

Over time, you will likely install many different programs on your laptop, some of which you use on a regular basis, and some of which you no longer need. Go to your Control Panel and the Programs tool to uninstall any programs you no longer use, which not only frees up more hard drive space, but can cut down on the number of programs running in the background.

  1. Disable Background Programs

Many applications, such as instant messaging clients, are set to run automatically when your system starts up. A few of these programs running in the background is not much of a problem, but more than that can cause a significant decrease in performance. Remove unnecessary programs from the Startup folder in your Start Menu as a first step. If there are still programs running in your taskbar, right-click and find Options or Settings to see if you can keep them from starting up automatically. Remember that you can always start these programs manually from your Start Menu.

  1. Check for Viruses

Another culprit in lost speed and performance is the presence of a virus or malware. Use a good antivirus program to scan for and clean any viruses or malware on your system, which often run in the background and degrade your laptop’s performance. This can also save you on costly repairs.

  1. Upgrade Your RAM

Although this step is a little more involved that the above steps, it is usually very easy to upgrade the RAM in your laptop and it can have a significant effect on performance. Upgrade to the maximum amount of memory your system can support in order to get the most effect.

If you follow these simple steps, you will likely see a dramatic improvement in system performance. For best results, repeat the first three steps every month or so to keep your system running as fast as possible.

How to Reduce Laptop Power Consumption

Power consumption is a leading concern of laptop users everywhere and proper use of the power utilities can lessen the load place upon the battery of the laptop. A few simple steps can be taken to preserve and conserve energy. First, if your laptop is capable of it, and it probably is, set the sleep or stand by settings to be turned on. These usually have a time set before which they will turn on. Depending upon your usage, this could be set to 5 minutes or to an hour; most average users set it to around 1/2 hour. If buying a new system choose a model with an LCD as they use less power and often have specific voltage and brightness controls to help in energy conservation.

The power utility in your laptop is the best place to start in power conservation. In Windows the path to the power utility looks something like this: Start  Settings  Control Panel  Power Options. This is the area that will allow you to set the time for the monitor to turn off as well as your hard driveand the amount of time it takes to switch to stand by. Power schemes are also available that have preset parameters like “Home/Desktop” or “Portable/Laptop.” These settings will automatically set the times for the typical laptop or home user. The provided “time” fields will be automatically filled in with the appropriate numbers and settings.

You can freely change any of these preset numbers in the selection made. For instance, if the setting shows 45 minutes to turn off the monitor you could change it to 30 minutes, an hour or whatever value you deem necessary. The average laptop can consume up to $50.00 a year in energy costs but using these simple utilities can help reduce this by half.

Static Electricity: The Computer Killer

Static electricity seems pretty harmless in everyday life. Perhaps you walk across a carpeted floor, touch a metal light switch, and get a minor shock, but this is generally nothing more than a minor annoyance. When it comes to computers, however, static electricity can be extremely harmful to the sensitive components that make up a desktop or laptop. Let us take a look at why static electricity is harmful, and what you can do to prevent damage.

hot sale product for Finger Spinner

Static electricity, like any electricity, is an exchange of electrons. When you rub your feet against a carpet or other material, one object is positively charged and the other is negatively charged. When you touch another object with the opposite charge of your body, or an object that is neutrally charged, the electrons flow into the new object. The voltage of static electricity can actually be extremely high, up to 12,000 volts, which sounds very dangerous. In reality, voltage is less threatening to humans than amperage, and the amperage is very low.

Computer components, however, are much more sensitive to these voltages. In fact, a component can be damaged by static electricity with a voltage as low as 400 volts, while a human won’t likely feel static electricity until it is around 3500 volts. In other words, you could damage a component with static electricity and not even know it. In some cases, the component may not fail immediately, but the static electricity weakens it and causes it to fail much sooner than it would have otherwise, and consequently leading to a repair in most cases.

The most thorough solution to static electricity damage is to use an anti-static wrist strap. These straps plug into the AC ground of a wall socket or connect to the chassis of the computer to dissipate any static that builds up. You can also use additional measures such as grounded pads to add even more protection. With a little preparation, you can avoid damaging computer components with static electricity and save yourself a lot of time and money.

Current Laptop Battery Technologies

Laptop battery technologies have continued to improve over the years, and the result has been lighter, smaller batteries that provide more power and charge more quickly. Here, we will take a look at the current technologies of laptop batteries, and some of the advantages and disadvantages of each.

Lithium-Ion

The most popular laptop battery technology in use today is lithium-ion. Li-ion batteries provide power when the lithium ions carry current from the negative electrode to the positive electrode. Ions move in reverse when charging. The main advantages of Li-ion batteries are their low price. It is one of the least expensive battery technologies to make. The batteries also have a very high power to weight ratio, which allows lightweight batteries to still provide a lot of power. Another advantage of Li-ion laptop batteries is they don’t suffer from the “memory effect” common in earlier battery technologies.

Lithium Polymer

As a subset of lithium-ion batteries, lithium polymer uses a special polymer composite to hold the electrolyte that can be molded into almost any shape and still retain its functionality. This makes it easy to design a battery to fill the available space, and therefore provide more power. It carries most of the same characteristics of lithium-ion batteries, just in a more flexible format.

Nickel-Metal Hydride

Nickel-metal hydride (NiMH) batteries are less common today, and have largely been replaced by Lithium-Ion technology. NiMH batteries are very rugged and resistant to damage and were used in laptops in previous years for this reason. Unfortunately, manufacturing a laptop NiMH battery is expensive, so it is less economical.

Nickel-Cadmium

Nickel-Cadmium (NiCd) batteries are also very rugged and resistant to damage. While this made them a good choice for laptop batteries, they often exhibited the “memory effect” in which they would lose capacity if not charged and discharged correctly, which made them a poor choice for laptops as users typically are inconsistent in how they charge and discharge their batteries. It has also been replaced by lithium-ion technology.

Battery technologies continue to evolve, as laptop manufacturers, repair shops, and part retailers continue to look for lighter, more reliable and less expensive solutions to power their computers. While new technologies such as lithium polymer show great promise, others may be just around the corner, and consumers will continue to benefit from these innovations.

How a Laptop Battery Works

Laptops are made for portability and ease of use, so the battery is one of the most essential components, providing power when away from a wall outlet. Here we will look at how a laptop battery works.

The most laptop batteries use Lithium-Ion technology, or Li-ion. They are so-named because the movement of lithium-ions from a negative to a positive electrode as they travel through a non-aqueous electrolyte. This discharges the battery and releases the energy to power the laptop components.

The inside of a Lithium-Ion laptop battery consists of an anode made from carbon, a cathode made of metal oxide, and an electrolyte, which is a lithium salt in an organic solvent. The reaction is contained within multiple “cells” inside the battery. Batteries with larger capacities (and longer battery life) usually contain more cells. Some very large Toshiba laptop batteries can contain up to 12 cells. Some Sony laptop batteries contain as few as 3 Cells due to the ultra portable design of some of their machines. These will provide less battery life, but will keep the machine small and lightweight.

There are a number of chips in most batteries to control the charge and discharge, as well as a number of safety features. Many batteries have a chip which shuts down the battery in the event of extreme overheating to avoid a potentially dangerous situation.

Charging the battery essentially works in the reverse of discharge. The power coming in through the AC adapter and the charging circuit actually provides a higher voltage than the battery’s normal operating voltage. This causes the lithium ions to move from the positive to the negative electrode and they are deposited in a porous material and stored for later use.

The outside of the battery is usually constructed of rigid plastic or metal, depending on the laptop model. The outer case usually incorporates vents to allow heat to escape, as heat can be very damaging to a battery. Most laptop batteries are color matched to the plastics of the notebook for aesthetic reasons.

The one disadvantage of Lithium-Ion batteries is that they tend to lose capacity over time. This is caused by deposits that form in the electrolyte of the battery. This begins to inhibit the battery’s operation and results in less charging capacity. Once the capacity gets low enough, the battery should be replaced.

While Lithium-Ion laptop batteries are currently the most popular, newer technologies such as lithium-polymer are stretching the boundaries of current laptop battery design. As laptop batteries continue to evolve, engineers will undoubtedly be able to provide more power, longer battery life, and reduced charge times to improve the portability of the laptop computer.

Picking the Correct Laptop AC Adapter

Choosing a laptop AC adapter replacement is fairly easy, but it is important to understand a few terms to ensure you get the proper replacement that is fully compatible with your laptop model. Using an incompatible adapter could cause damage to both the adapter and to your laptop, so it is imperative that you take a moment to understand the main points that differentiate laptop AC adapters.

An AC adapter converts the AC (alternating current) power coming from a wall outlet into DC (direct current) power that the laptop requires. Virtually all AC adapters will support the correct AC current, so the focus should be on finding an adapter that provides the proper DC current for your laptop’s model.

If you look on the original laptop AC adapter for your laptop you will see a number of specifications for the voltage, polarity, etc. for this adapter. You can sometimes find this information on the laptop itself as well. Look on the sticker at the bottom of the laptop for this info. Sometimes this information is also listed near the DC jack where the AC adapter is plugged into the machine. This will often read something like “DC18V 5A (MAX)”.

The first important number is the voltage. Common voltages are 15V, 16V, 18V, 19V, 20V, 22V, and 24V. The second most important number is the amperage, or amps. Common amp ratings are 6A, 5.6A, 4.7A, 4.5A, and 3.8A. It is important that both of these numbers match to ensure compatibility. Both of these numbers work together to produce the overall wattage of the adapter, which is the voltage multiplied by the amperage. So an 18.5 Volt 4.1 Amp HP AC adapter would end up with a rating of 75 Watts.

Another specific marking is the tip polarity which can be found on the brick portion of the adapter. This is a symbol with a + and – sign and a graphic indicating whether the tip or ring are positive or negative. If the positive circle is connected to the small center dot, for example, the adapter has a positive polarity, meaning that the tip is positive and the barrel is negative. Make sure the polarity of the AC adapter matches the laptop; most laptop AC adapters are center positive.

The last important factor of an AC adapter is the size of the tip. If the tip is too small or too large, it will not fit the connection point on your laptop. The tip is most often expressed as a measurement, such as the 6.3mm x 3.0mm tip used on some common Toshiba laptop AC adapters. Generally if you use your model number or the original part number you should not have to be concerned with the tip size.

To simplify the process, you may consider using an online parts supplier which can help you find compatible parts for your laptop model. Armed with the information above, however, you can make a very informed decision and know the part you are purchasing is compatible with your laptop.

Graphene – The Next Laptop Battery Innovation?

Laptop and battery manufacturers are constantly working to improve battery life and cut down on the time it takes to recharge a battery. A new material known as Graphene could help manufacturers improve both.

Graphene is a material being developed by a company called Vorbeck. They say it could result in laptop batteries that charge more quickly and also have a longer life than current lithium-ion technology used in batteries for HP laptops as well as others. As an example, a cell phone battery which uses Graphene could potentially charge in around 10 minutes instead of two hours.

Since current lithium-ion batteries transfer ions between electrodes, for power, it can take a long time for them to charge, and they are not necessarily efficient at storing power. Graphene could potentially improve on these points. It can store more ions, which could greatly increase battery life, and its high conductivity makes it easier and faster to move ions, which accounts for its faster recharge times.

Safety and overall battery life may be improved as well. Since Graphene is more conductive, it produces less heat, and batteries operate at lower temperatures. This is good for the battery and the device, promoting safer operation and is less likely to cause damage from excessive heat. The lack of heat is also what allows the batteries to charge more quickly, as current batteries are often limited to recharge rates to avoid creating too much heat. For most laptop batteries, like those used in Compaq laptops, it is standard to have a thermal sensor to read the internal battery pack temperature and adjust the charging voltage accordingly for safety.

Graphene batteries are potentially more rugged than current lithium-ion batteries. The materials are able to swell and flex without breaking down, unlike current technologies, which slowly lose capacity. This could lead to a much longer usable battery life before the battery needs to be replaced.

As better technologies continue to improve, companies like Vorbeck have the potential to revolutionize battery technologies with better materials that offer multiple improvements. Only time will tell if laptop manufacturers and retailers will adopt Graphene as the standard for future battery technology. It certainly shows promise in an area that is in need of improvement for laptop usability.

Pros and Cons of High Capacity Laptop Batteries

Outside of actual machine performance, battery life of a laptop is a huge selling point. After all, what is the machine worth if it lasts less than an hour off the charger? One way to increase the battery life of your notebook is to simply well, increase the size of the battery itself. However, size isn’t the only factor when it comes to buying a new battery.

The first thing you should look at is actually not the laptop’s battery. Take stock of your machine. Are you using a netbook, a notebook, or a desktop replacement PC? A netbook will usually have a fairly miniature screen, approximately 10 inches. A notebook will have a 14-15 inch screen, and entertainment notebooks or desktop replacement PCs will generally have 17 inch or larger screens. This is not conclusive, as the type is more defined by specifications and hardware, but it is a good general rule as it applies to power consumption. Smaller screens take less electricity to power, and a smaller machine also generally has smaller, less energy demanding hardware. A netbook battery like the Toshiba NB205 6 cell battery can last three times as long on the same capacity battery in a standard notebook under the right conditions; this is mainly due to the scaling down of the parts in the Toshiba NB205 versus that of a full sized notebook. Some entertainment notebooks and the like are not made to function for extended periods on batteries, rather they are meant to spend most of their time on their adapters, only functioning on backup power rarely as needed.

Once you know what you’re working with, assess where you need to take it. If you’re just typing papers for school on the machine, chances are you can find an outlet in your library or somewhere at home or on campus. However if you’re taking notes throughout all your classes, you may have less reliable access to outlets, and you will potentially be on battery power for a few hours at a time.

When purchasing an upgraded or replacement battery for your machine, the cells will be what indicate potential longevity. Three cell batteries aren’t widely used as they last for nearly negligible amounts of time off AC power. Six cell batteries and nine cell batteries are progressively more expensive, but they will power your machine two and three times longer than a three cell battery, respectively. They are also the most common sizes of battery purchased by consumers. Twelve cell batteries are available for heavy users, but can become sizably more expensive than others.

Keep in mind also that nine and twelve cell parts become progressively larger, adding bulk and weight to your machine and making it that much less portable or easy to take with you on the go. In these cases, you may want to consider simply carrying a second battery. Whichever choice you make on your laptop battery purchase, use a knowledgeable and high quality laptop battery supplier to be sure you get a fully compatible battery.