iPad common fault solution

Today, both the life and the work can see the tablet to the figure, but if you don’t pay attention to it, you will be damaged or malfunction. Today, teach you how to solve common faults.

First, the reason why the tablet can’t open the machine

When the power of the tablet is insufficient, please plug in the power. When using the tablet for the first time, please plug in the power before turning on the phone, charge it for 30 minutes, then turn it on and keep charging. Because the charging state is slower when the power is turned on, turning it on while the battery is exhausted may cause the system to automatically shut down. Press the reset button to press and hold the power button and MENU button to restore the factory.

Second, how to solve the tablet crash?

If a crash occurs during operation, press the reset button to restart. In order to prevent the crash, on the one hand, please pay attention to not too fast when you click the button, it is recommended to operate one by one; on the other hand, if the battery is low, please charge it in time.

 

 

Third, what should I do if the touch is not sensitive?

There is a “touch screen calibration” option in the “Settings” menu. After entering, the cross-shaped symbols will appear in the upper left corner, upper right corner, lower left corner, lower right corner and center position. Touch the tablet stylus to calibrate the touch screen. Yes

 

Fourth, boot white screen, can not enter the system

When the power is insufficient, it is normal for the white screen to be turned on. If you charge more than half an hour after the power is turned off, you can enter the operating system after rebooting.

Five, how to restore the factory

Open Settings -> Privacy and choose to restore factory settings. In the off state, you can also restore the factory settings by pressing the button. Press the power button and MENU button at the same time (two buttons at the same time), the English option interface will appear. There are four options. Press and hold the circle button on the tablet. Select, press the MENU button at the top of the tablet to select upwards, select the third option, then press the HOME button, the factory settings will be automatically restored, the recovery will be completed, then the English option will appear again, select the first item, press the HOME button Automatic restart, recovery is successful.