Find the 1300mAh/4.81WH 3.7V cellphone battery model replacement Coolpad CPLD-104 battery, high-quality charging type of Coolpad 8056 Smartphone. Fast shipping in the UK and shopping easily online. Getting more information about batteries models, you need to visit the UK-online battery store-www.uk-online.co.uk.
Brand: Coolpad smart phone
Replace the following part numbers:
- Coolpad CPLD-104
- Fits the Following Models:Coolpad 8056 phone
Charge limit voltage:4.2V
Other online stores for your choice
Coolpad CPLD-104 Mobile phone battery common faults
1, the battery is not durable. There are many reasons why a mobile phone battery may lose power faster than usual. You can look at the battery consumption of each app in the settings. For some power-hungry users, if you are not used to it, don’t leave them in the background of the phone. With the battery-optimized app, you can monitor and end some useless applications and processes to save power and extend battery life.
2, suddenly shut down. It is often found that the phone battery suddenly shuts down before the battery reaches zero. This is mainly because the electricity metering is not allowed.
The mobile phone automatically shuts down when the battery power has not been used up, in order to keep some of the memory and normal use, but the aging of the mobile phone increases the error of reaching the critical value.3, feels very hot when charging. Nowadays, fast charging is popular, in fact, it is to charge the mobile phone with a large current. When charging, the energy conversion process will heat up. Under normal circumstances, there is no problem, and the general manufacturers have done rigorous testing. However, if you feel very hot, then beware of whether the battery is a problem, after all, there have been some “big killer” pretending to be a mobile phone. Also be careful to avoid extreme conditions, such as summer hot and hot cars.
iPhone mobile phone battery common faults
1, iPhone consumes power quickly. If you want to know why your phone is running fast, you can check it from the battery data built into iOS. The method is to enable “Settings” – “Battery”. Next, you will list all the power consumption of the app. According to the data of 24 hours or the whole week to determine which app is silently consuming mobile phone power.
Of course, after discovering which apps are power-hungry monsters, the user can choose to delete the app directly, or to minimize the consumption of mobile phone resources by closing the background operation and location GPS service. The practice is to open “Settings” – “General” – “Background App Rearrangement”, where you can disable any App completely.
The way to turn off the location GPS service is to turn off the specific app in “Settings” – “Privacy” – “Location Services”, or simply close the “Location Services” option.
In addition to the above, the network rumors that iOS’s “HeySiri” function will also cause a lot of power consumption, because the iPhone must be on standby to hear the user’s voice command, you must open Siri. To turn off the HeySiri function, go to “Settings” – “Siri” and turn off the “Listen HeySiri” option.
2, the iPhone suddenly shuts down. Excluding the normal power consumption and causing the shutdown, if the iPhone automatically shuts down when the power is normal, it is related to the system problem.
The most basic way is to check if there are any new updates to the system. A new version of iOS will fix the iPhone battery. In the past iPhone6s era, it was revealed that the mobile phone would automatically shut down when the power left around 30%, and then the problem was solved after Apple introduced the correction. To check if there is a new update to the system, go to “Settings” – “General” – “Software Update”.
If it is determined that the mobile phone is operating the latest iOS system, the second method is to reset the entire mobile phone. Of course, it is first recommended to back up the entire iPhone through iCloud or iTunes, and then through the “Respond to iPhone” function of iTunes. To refill the whole hand.
In addition to refilling, the user can also choose to set the iPhone directly to the factory settings by “Clear All Contents and Settings” in “Settings” – “General” – “Reset”.
3, the phone is abnormally overheated when charging. This phenomenon usually occurs, and all of them are directly related to the charger. If you use a brand-name instead of the original factory-certified charger, you will often give the iPhone the wrong voltage, which will make the iPhone’s motherboard overheat, even Burned out. Therefore, it is best to recommend the purchase of an iPhone charger, you must use the original certified third-party brand charger, or directly buy Apple charger is also a solution.
Common fake battery identification method
1. The average Ni-cd battery is 500mAh or 600mAh, and the Ni-mh battery is only 800-900mAh. The capacity of the lithium-ion mobile phone battery is generally between 1300-1400mAh, so the time for the lithium battery to be fully charged is about 1.5 times that of a nickel-hydrogen battery is about 3.0 times that of a nickel-cadmium battery. If you find that the working hours of the lithium-ion mobile phone battery block you purchased are not advertised or as long as specified in the manual, it may be counterfeit.
2. If we find that the battery is extremely hot or smokes or even explodes during charging, the battery is definitely fake.
3. If a lithium-ion mobile phone battery block is faked with a cadmium-nickel or a hydrogen-hydrogen battery block, it must be composed of five single-cell batteries. The charging voltage of a single battery generally does not exceed 1.55V, and the total voltage of the battery block does not exceed 7.75V. When the total charging voltage of the battery block is lower than 8.0V, it may be a Ni-cd or Ni-mh battery.
More popular article recommendations
Alcatel TLI020F7 cellphone battery 2000MAH/7.6Wh
2955C7 58-000187 battery 6300mAh/23.94Wh for Amazon Kindle Fire HD 7”
HP 462969-B21 Ni-mh battery 650MAH/4.8v
8-000092 26S1006 tablet battery 3400MAH/12.58WH 3.7v for Amazon Fire Kids HD 6 PW98VM
GP-S10-346392-0100 Amazon battery 1750MAH/6.5WH for KINDLE 3 3G WIFI Kindle Keyboard III -Black
MR-BAT6V1SET Mitsuishi 6v PLC battery for MR-J4
Other Hot Sales:
Asus C11P1502 tablet battery 4750mAh – 3.8V
CLEVO 6-87-W370S-4271 laptop battery 5200mah/76.96Wh – 14.8V
Motorola GK40 replacement battery 2200mAh – 3.8V
Lenovo L14D2P31 tablet battery 7000mAh/26.60wh – 3.8V
Bose 404600 replacement battery 2300mah – 11.1V/12.4v
Bose 063404 replacement battery 2230mAH/17Wh – 7.4V
Bose 061384 replacement battery 2230mAH/17Wh – 7.4V
Alcatel TLI020F7 replacement battery 2000MAH/7.6Wh – 3.8V/4.35V
OPPO BLP637 replacement battery 3300mAh/12.70WH – 3.85V
BOSE 078592 replacement battery 5500MAH – 14.8V
Bose 789175 replacement battery 5500MAH/79.2wh – 14.4V
Bose 63287 replacement battery 2230mAh/17Wh – 7.4V